Guide to Remote Provisioning of Wildix devices

Remote provisioning is used for remote/unreachable devices behind NAT/Firewall

 


 

STEP 1: Generate a provisioning link on WMS

 

    1. Go to the WMS > Devices → click on “+Add” → select “Semi-Automatic mode” → “Next”

  • Insert the device’s Mac Address into the field → click on “Next”

 

Usually Mac Address is situated on the rear panel of your device

  • The provisioning link has been generated → copy the Provisioning URL

 

Please, use the option “Copy Link Address” in order to copy the complete string of the provisioning URL.

Here are examples of a Provisioning URL:
http://[PBX_IP]/?action=setaps&config=xml (W01GSM)
http://[PBX_IP]/?action=setaps (other devices)

  • Click on “Finish” → the new device appears on the list:

 


Step 2: Insert the provisioning link on the device’s web interface

 

WP4X0 2015

      1. Go to device’s web interface

Credentials for the first time access: admin : admin

      1. Go to menu Upgrade -> Advanced
      2. Insert the provisioning URL into the field “URL”
      3. Click “Autoprovision”

Device is now rebooting (the phone screen indicates that the device is rebooting; after the reboot, you can see the date and time, soft keys and “login0X” on the screen)


WP4X0 old generation and WP500

      1. Go to device’s web interface

Credentials for the first time access: admin : admin

      1. Go to the menu Upgrade -> Advanced
      2. Insert the provisioning URL into the field “URL”

  • Click on “Confirm”

 


Device is now rebooting (the phone screen indicates that the device is rebooting; after the reboot, you can see the date and time, soft keys and “login0X” on the screen)


WP600

note: this is WP600 old generation (pre 2015); new generation WP600AXX do not support provisioning via WMS, for configuration of WP600AXX (both remote and local), follow the steps described here: https://manuals.wildix.com/wp600a-wp600acg-user-guide/

      1. Go to device’s web interface

Credentials for the first time access: admin : admin

      1. Go to the menu Phone > Auto Provision
      2. Insert the provisioning URL into the field “Server URL”

      1. Click on “Autoprovision Now”

Device is now rebooting (the phone screen indicates that the device is rebooting; after the reboot, you can see the date and time, soft keys and “login0X” on the screen)


W01GSM

      1. Go to device’s web interface

Credentials for the first time access: admin : admin

      1. Go to the menu System > System Configuration
      2. Insert the provisioning URL into the field “Primary Profile URL”

      1. Click on “Save”
      2. Press “Back” on the prompt page
      3. Click on “Provision”


Device is now rebooting


W04FXS and W04FXO

      1. Go to device’s web interface

Credentials for the first time access: admin : admin OR admin : wildix (depending on the fw version)

      1. Go to the menu Device Setting > Provisioning
      2. Select “Provisioning Type: HTTP” and enter the following parameters:
        • HTTP Config URL: insert the provisioning URL
        • Refresh Interval (minute): enter the value “14400”

      1. Click on “Apply”
      2. Change the URL address: delete /home.asp and add: /Maintenance.asp to the URL

Example: http://192.168.4.12/Maintenance.asp

      1. Select “Reboot” and press “Apply”


Device is now rebooting


PRI, BRI, W04FXS (old generation), W08FXS, W16FXS, W24FXS

      1. Go to device’s web interface

User name for the first time access is public, no password.

      1. Go to the menu Management > Configuration Scripts
      2. Fill in the following fields inside the section “Execute Scripts”:
        • Specific File Name: insert the part of the provisioning URL without the PBX IP address: ?action=setaps
        • Transfer Protocol: select “HTTP”
        • Host Name: enter the PBX IP address or domain name
      3. Click on “Submit & Execute Now”

pri_interface

Device is now rebooting


W24FXS 2015

      1. Go to device’s web interface

Credentials for the first time access: admin : admin

      1. Go to the menu Management > Provision:
      2. Fill in the following fields:
        • URL: insert the provisioning URL (Important: make sure the IP address is used inside the provisioning URL, domain names are currently not supported)
        • Check Interval: enter the value 604800
      3. Click “Save”



W01FXS 2014

      1. Go to device’s web interface

Credentials for the first time access: admin : admin

      1. Go to the menu Management > Auto Provision:
        • Provision Active: select “HTTP”
        • HTTP Server: enter the PBX IP address or domain

      1. Click on “Submit”

      1. Click on “save and reboot”

Device is now rebooting


W01FXS old generation

      1. Go to device’s web interface

Credentials for the first time access: admin : admin

      1. Go to the menu Others > Auto Config
      2. Modify the following fields:
        • Auto Configuration: select “HTTP”
        • HTTP Server: enter the PBX IP address or domain
      3. Click on “Submit”

      1. Go to the menu Save change
      2. Click on “Save”


Device is now rebooting


W-AIR

      1. Go to device’s web interface

Credentials for the first time access: admin : admin

      1. Go to the menu Management
      2. Modify the following fields:
        • Management Transfer Protocol: select “HTTP”
        • Configuration Server Address: enter the PBX IP address
        • Base Specific File: insert the part of the provisioning URL without the IP address of the PBX: ?action=setaps
        • Multi Cell Specific File: the same value as in Base Specific File
        • Configuration File Download: select “Base and Multi Cell Specific File”
      3. Click on “Save and Reboot”


Device is now rebooting

After you have created the W-AIR Network in the WMS > Devices > W-AIR Networks, you should reboot the base station again.


W-AIR Small Business

      1. Go to device’s web interface

Credentials for the first time access: admin : admin

      1. Go to the menu Management
      2. Modify the following fields:
        • Management Transfer Protocol: select “HTTP”
        • Configuration Server Address: enter the PBX IP address
        • Base Specific File: insert the part of the provisioning URL without the IP address of the PBX: ?action=setaps
        • Configuration File Download: select “Base Specific File”
      3. Click on “Save and Reboot”


Device is now rebooting


Note: After provisioning

 

    • As soon as the device has rebooted, go to the WMS > Devices

The provisioned device should be present on the list, now you can see the Model (e.g. wp600 instead of phone), the device’s IP address and the FW version.
Credentials to access the device’s web interface after the provisioning:

    • login : admin
    • password : use the value in the field “Password” in WMS:


    1 Star2 Stars3 Stars4 Stars5 Stars (8 votes, average: 4.63 out of 5)
Loading...