Feature Codes

Feature codes are useful for IP phone users and web users as they provide such features as call recording, call intrusion, switch active device during a call and many others. They are also helpful for analog phone users as they allow performing call transfers, set up user status, call forwarding etc.

Feature codes can be changed, on this page you can find the default settings with examples.

WMS Version 3.84
Updated: April 2017

 

  • FEATURES:
    Status (DND/Away); Busy call forwarding; Unavailable call forwarding; Force call forwarding; Call waiting; Mobility extension management; Call timeout; Telephone blocked; Ring only active device; Mobility confirmation
  • INCALL FEATURES:
    Blind transfer; Attended transfer; Cancel the transfer; Record; Continuity
  • SERVICES:
    Voicemail; Directory; Login; Personal record; Shared record; Silent intrusion; Partial intrusion; Conference intrusion; Virtual scanner; Fax relay; Paging; Hide number; Switch; 3 state switch; Timetable; Pickup; Continuity; Call group; Call group management; Intercom; Speed dial; Conference; Echo; Wake up call; Make up Room; Room Inspecting; Minibar

Preferences

Prefix

You can enter the prefix which is automatically prepended to all feature and service codes, e.g. *

Features

Some of these call features can be also activated in Collaboration Settings > Features; and in WP “Features” menu.

Status (DND/Away)

Default code: 60
Description: Status (DND/Away)
Options: 0 for available / 1 for DND / 2 for Away
Usage:

change user status:

  • dial the feature code and follow the audio instructions
  • or enter the string: 60*1/2/0, then send the call

Example: enter the string 60*1 and send the call, where “1” is the option to enable DND status

Busy call forward (BCF) / Unavailable Call forward (UCF) / Force call forward (FCF)

Default codes: 61 / 62 / 63
Descriptions: Forward calls when user is busy in another conversation / Forward calls when there is no answer within call timeout / Forward all calls
Options: 0 to deactivate / 1 to activate / 2 to set the destination number / 3 to auto-switch
Call classes: 1=external; 2=blacklist; 3=whitelist
Usage:

enable / disable feature for internal call class: call the feature code and follow the audio instructions

enable / disable / auto-switch feature for all available classes: enter the string <FC>*1/0/3, then send the call

Example: 61*1 – activate BCF for all available classes; 62*3 – activate UCF for all available classes if it was previously deactivated for at least one class / deactivate the feature for all available classes if it was previously activated for at least one class

set the destination number for all available classes: enter the string<FC>*2*<X>, then send the call

Example: 63*2*1 – set up the destination number Voicemail for FCF for all available call classes (all the classes, that are activated in user preferences)

enable/disable/auto-switch feature for specified call class: enter the string <FC>*1/0/3*<callclass>, then send the call

Examples: 61*1*2 – activate BCF for blacklist; 62*3*1 – auto-switch UCF feature status for external class

set the destination number for specified call class: enter the string <FC>*2*<X>*<callclass>, then send the callExample: 63*2*100*1 – set up the destination number “100” for FCF for external class; note: for Voicemail destination, use option “1”, example: 63*2*1*1

Note:

  • for WP pre 2015, add asterisk * in the end of the string (example: 61*2*100*1*)

Call waiting

Default code: 64
Description: Receive more than one call at a time
Options: 0 to deactivate / 1 to activate / 3 to auto-switch
Call classes: 1=external; 2=blacklist; 3=whitelist
Usage:

enable / disable feature for internal call class: call the feature code and follow the audio instructions

enable / disable / auto-switch feature for all available call classes: enter the string 64*0/1/3, then send the call

Example: 64*1 – activate the feature for all available call classes; 64*3 – activate feature for all available call classes if it was previously deactivated for at least one class / deactivate the feature if it was previously activated for at least one class

enable/disable/auto-switch feature for specified call class: enter the string 64*1/0/3*<callclass>, then send the call

Examples: 64*1*2 – activate the feature for blacklist; 64*3*1 – auto-switch the feature status for external class

Mobility extension management

Default code: 75
Description: Forward calls also to the mobile number after the timeout
Options: 0 to deactivate / 1 to activate / 2 to set the timeout / 3 to auto-switch
Call classes: 1=external; 2=blacklist; 3=whitelist
Usage:

enable / disable feature for internal call class: call the feature code and follow the audio instructions

enable / disable / auto-switch feature for all available classes: enter the string 75*1/0/3, then send the call

Example: 75*1 – activate the feature for all available classes; 75*3 – activate the feature for all available classes if it was previously deactivated for at least one class / deactivate the feature for all available classes if it was previously activated for at least one class

set the timeout for all available classes: enter the string 75*2*<X>, then send the call

Example: 75*2*10 – set up the timeout 10 seconds for all available call classes (all the classes, that are activated in user preferences)

enable/disable/auto-switch feature for specified call class: enter the string 75*1/0/3*<callclass>, then send the call

Examples: 75*1*2 – activate the feature for blacklist; 75*3*1 – auto-switch the feature status for external class

set the timeout for specified call class: enter the string 75*2*<X>*<callclass>, then send the callExample: 75*2*10*1 – set the timeout 10 seconds for external class

Note: for WP pre 2015, add asterisk * in the end of the string (example: 75*2*10*1*)

Call timeout

Default code: 65
Description: Ringing time for phones; after timeout, the call is disconnected or forwarded to the number specified in Unavailable call forward
Options: 0 to deactivate / 1 to activate / 2 to set the timeout
Call classes: 1=external; 2=blacklist; 3=whitelist
Usage:

enable / disable feature for internal call class: call the feature code and follow the audio instructions

enable / disable / auto-switch feature for all available classes: enter the string 65*1/0/3, then send the call

Example: 65*1 – activate the feature for all available classes; 65*3 – activate the feature for all available classes if it was previously deactivated for at least one class / deactivate the feature for all available classes if it was previously activated for at least one class

set the timeout for all available classes enter the string 65*2*<X>, then send the call

Example: 65*2*10 – set up the timeout 10 seconds for all available call classes (all the classes, that are activated in user preferences)

enable/disable/auto-switch feature for specified call class: enter the string 65*1/0/3*<callclass>, then send the call

Examples: 65*1*2 – activate the feature for blacklist; 65*3*1 – auto-switch the feature status for external class

set the timeout for specified call class: enter the string 65*2*<X>*<callclass>, then send the callExample: 65*2*10*1 – set the timeout 10 seconds for external class

Note: for WP pre 2015, add asterisk * in the end of the string (example: 65*2*10*1*)

Telephone blocked

Default code: 72
Description: Disables outgoing calls
Options: 0 to deactivate / 1 to activate / 3 to auto-switch
Note: in order to deactivate “Telephone blocked”, you must enter the user password

Usage:

enable / disable feature: call the feature code and follow the audio instructions

enable / disable / auto-switch feature: enter the string 72*0/1/3, then send the call

Example: 72*1 – enable the feature; 72*3 – enables feature if it was previously disabled / disables the feature if it was previously enabled

Ring only active device

Default code: 68
Description: If activated, only the active device rings (ringer is disabled on other devices); note: active device is selected in Collaboration top menu
Options: 0 to deactivate / 1 to activate / 3 to auto-switch
Usage:

enable / disable feature: call the feature code and follow the audio instructions

enable / disable / auto-switch feature: enter the string 68*0/1/3, then send the call

Example: 68*1 – enable the feature; 68*3 – enables feature if it was previously disabled / disables the feature if it was previously enabled

Mobility confirmation

Default code: 69
Description: If activated, the user is informed on who the caller is, when answering a call from the mobility extension
Options: 0 to deactivate / 1 to activate / 3 to auto-switch
Call classes: 1=external; 2=blacklist; 3=whitelist
Usage:

enable / disable feature for internal call class: call the feature code and follow the audio instructions

enable / disable / auto-switch feature for all available call classes: enter the string 69*0/1/3, then send the call

Example: 69*1 – enable the feature for all available call classes; 69*3 – enables feature for all available call classes if it was previously disabled for at least one class / disables the feature if it was previously enabled for at least one class

enable/disable/auto-switch feature for specified call class: enter the string 69*1/0/3*<callclass>, then send the call

Examples: 69*1*2 – activate the feature for blacklist; 69*3*1 – auto-switch the feature status for external class

Incall features

These actions can be performed during a call.

Blind transfer

Default code: #9
Description: Code to transfer calls without notifying the receiver
Usage: Enter #9 during a call, then enter the destination number followed by pound

Attended transfer

Default code: #8
Description: Code to transfer calls with notification
Usage: Enter #8 during a call, then enter the destination number followed by pound

Cancel the transfer

Default code: #1
Description: Code that cancels an attended transfer (made via feature code #8 by default) and allows the caller to return to the previous call
Usage: First make an attended transfer via feature code, then press #1

Record

Default code: *1
Description: Code to start or stop call recording during the call
Usage:

start / stop call recording:

Press *1 during a call to start call recording; press it again to stop the call recording

Continuity

Default code: *5
Description: Code to switch a call to another device
Usage: Press *5 during a call: other devices registered to your account start ringing allowing you to pick up the call from another device

Note: it is also possible to dial *5 on one of the devices registered to your account to continue the conversation from that device, see “Continuity” service code in “Services” section of this guide.

Services

Access to different Wildix Unified Communications services.

Voicemail

Default code: 81
Description: Access code to the voicemail
Usage:

access your voicemail:

  • dial the feature code and follow the audio instructions

access voicemail of another user:

  • enter the string 81*<extension> or 81<extension>, then send a call
  • follow the audio instructions to enter the WEB password of user (used for access to WMS/Collaboration).

example: enter the string 81*100 or 81100 and send a call, where “100” is the extension

Note: To enter the password, enter digits instead of letters and “*” instead of all the special characters. Example: Password: 4Ag7$Z >>> Enter: 4247*9

listen to new / old messages: call 81, press 1 for new / old messages, then:

  • press 2 for message details
    • press 2 to change folders (new / old / work / family / friends messages)
    • press 3 for advanced options (send a reply / listen to the message envelope / send a Voicemail message)
    • press 5 to repeat the current message
    • press 7 to delete this message
    • press 8 to forward the message to another user
    • press 9 to save this message

send a Voicemail message to yourself / to another user: call 81, press 3 for advanced options, then press 5 and follow the audio instructions

record your name / your unavailable / your busy message: call 81, press 0 for mailbox options, then:

  • press 1 to record your unavailable message and follow the audio instructions
  • press 2 to record your busy message and follow the audio instructions
  • press 3 to record your name and follow the audio instructions

Directory

Default code: 82
Description: Dial by name feature allows you to enter a part of the name or surname for the search.
This feature is also available via Dialplan application “Dial by name”. Users can record their names via Service code Voicemail 81 (call 81, press 0 for mailbox options, then press 3 to record your name)
Usage:

dial by name: (user you are dialing must have his/her name previously recorded) call 82 and follow the audio instructions to enter a part of a name or surname for the search.

Note: at the moment (WMS version 3.84 this feature is available only for US sound package, so make sure the US sound package is installed and selected as user language)

Login

Default code: 99
Description: Code for phones login service
Usage:

assign WP4X0 / W-AIR phone to user:

  • dial 99 from Wildix phone and follow the audio instructions to register the phone (WP4X0, W-AIR)
  • otherwise enter the string 99*<extension>*<password>, then send a call

example: enter the string 99*100*4247*9 and then send the call, where “100” is the extension, “4247*9” is the WEB password (used for access to WMS / Collaboration) of the extension “100” transformed into digits.

Note: To enter the password, enter corresponding digits instead of lowercase and uppercase letters and “*” instead of all the special characters. Example: Password: 4Ag7$Z >>> Enter: 4247*9

Personal record / Shared record

Default codes: 84 / 74
Descriptions: Personal record service code allows you to create a new personal voice recording or to delete / rewrite / playback an existing personal call recording; user who has an email address associated to his / her account receives the recording file by email. Shared record service code allows you to create a new shared voice recording or to delete / rewrite / playback an existing shared call recording (the call recording is then available in the WMS Sounds menu).
Usage:

record a new file:

  • dial the feature code, enter the number you wish to assign to the file or wait for several seconds till the number is automatically assigned, then say the text that you wish to record; when done press the pound key or hang up
  • or enter the string <FC>*X or <FC>X (where X is the recording ID number), then send the call and follow the audio instructions to record the file

example: enter the string 84*111 or 84111 and then send the call, where “111” is the number you wish to assign to the file

  • otherwise enter the string 74*X*1, then send a call; where X is the recording ID number, 1 is the option allowing you to record the file

example: enter the string 74*111*1 and then send the call, where “111” is the number you wish to assign to the file, “1” is the option to record the file

rewrite / playback / delete an existing file:

  • dial the feature code, enter the number of the existing file and follow the audio instructions
  • or enter the string <FC>*X or <FC>X (where X is the existing recording ID number), then send the call and follow the audio instructions to rewrite / playback / delete the file

example: enter the string 84*111 or 84111 and then send the call, where “111” is the number of the existing file that you wish to rewrite / playback / delete

  • otherwise enter the string <FC>*X*0/1/2, then send a call; where “0” is to delete / “1” to record / “2” to playback

example: enter the string 74*111*2 and then send the call, where “111” is the the number of the existing file, “2” is the option to playback the file

Silent intrusion / Partial intrusion / Conference intrusion

Default codes: 86 / 87 / 85
Description: Use Silent intrusion code for secret intrusion (members of the call are not notified); Partial intrusion code – for partial intrusion (only one party can hear you); Conference intrusion code – for complete conference intrusion (all the parties can hear you)
Usage:

do an intrusion on a call of another user:

  • dial the feature code and follow the audio instructions
  • otherwise enter the string <FC>*<extension> or <FC><extension>, then send a call

example: enter the string 86*100 or 86100 and then send the call, to do a silent intrusion into the conversation of user 100.

Virtual scanner

Default code: 89
Description: Code to send by mail a file from a fax machine to a user with an associated email in LDAP (code to digitize a fax). This service code is dialed from the fax machine (fxs user) and allows you to convert the fax into the digital format;
Prerequisite: the user who receives the fax must have an email address associated to his / her account
Usage:

send a fax from fax machine to yourself / to user: enter the string 89*<extension> or 89<extension> from fax machine, then send a call

example: enter the string 89*100 or 89100 and then send the call, where “100” is the extension number of user who receives the fax user 100 receives fax to email; fax is also saved to call history; fax sender and recipient can be the same user or different users

Fax relay

Default code: 90
Description: Code to send a file from a fax machine to a user which is another fax machine and also to his email address, if present in LDAP. Send fax from fax machine (fxs user) to the indicated fax number with the possibility to save fax in the digital format / send a fax to fax machine (fxs user) with the possibility to save fax in the digital format / send a fax from fxs user to trunk.
Usage:

send fax from fax machine to fax number

  • enter the string 90*<fax_number> or 90<fax_number> from fax machine (fxs user), fax report is sent to email and saved in call history of fxs user

example: enter the string 90*0461019978 or 900461019978 and then send the call, where “0461019978” is the fax number

send a fax from another user to trunk:

  • enter the string 90*<extension>*<fax_number> from fax machine (fxs user), then send a call, fax report is sent to email of that user (if user has an email address in user preferences)

example: enter the string 90*100*0461019978 and send a call, where “100” is the user, “0461019978” is the fax number; fax report is sent to email of user 100 and saved to call history of fxs user and user 100

incoming fax from trunk to fxs user:

  • edit the dialplan procedure used for incoming faxes (“main” by default): add the application “Detect fax” (in case phone number is used both for faxes and calls, or otherwise, use the application “Jump to”) and select the procedure “pbxfeatures” or “pbxservices” and edit the called number: “custom” > 90*<fxs_extension>;

example: enter the custom number 90*101 in the Dialplan procedure, where “101” is the fxs user extension number; fax is received by fxs user 101 and saved to call history

incoming fax from trunk to fxs user and to another user’s email: (user must have an email address in user preferences) edit the dialplan procedure used for incoming faxes (“main” by default):

  • add the application “Jump to” > “pbxfeatures” or “pbxservices” procedure and edit the called number: “custom” > 90*<extension>*<fxs_extension>
  • otherwise use the application “Detect fax” (see the previous example)

fax is received by fxs user and fax report is sent to the email of user

example: enter the custom number 90*100*101, where “100” is another user who receives fax report to email, “101” is fxs user who receives fax; fax is received by fxs user 101, fax report is sent to email of user 100, and saved to call history of both fxs user 101 and user 100

Paging

Default code: 91
Description: call a Paging group (paging group is a group of devices that answer in speakerphone mode, allowing you to transmit an important message to a number of extensions simultaneously); Paging groups are configured in WMS Dialplan > Paging groups
Usage:

make an announcement to extensions subscribed to a paging group:

  • dial 91 and follow the audio instructions
  • otherwise enter the string 91*<paging_group> or 91<paging_group>, then send a call

example: enter the string 91*10 or 9110 and then send the call, where “10” is the paging group ID

Hide number

Default code: 92
Description: Code to disable the visualization of the caller ID for outgoing trunk calls
Pre-requisites: the option “Privacy Header = id,user” and “Cid Header = P-Asserted-Identity” must be enabled in SIP trunk settings
Options: 1 to activate / 0 to deactivate / 3 for auto-switch
Usage:

enable / disable / auto-switch feature for all outgoing trunk calls

  • dial 92 and follow the audio instructions
  • otherwise dial 921 to enable / 920 to disable / 923 to auto-switch (new feature status is displayed on the WP screen)

enable feature before placing a call to trunk:

  • otherwise enter the string 92*<phone_number> or 92<phone_number>, then send a call

example: enter the string 92*04611715111 or 9204611715111 and then send the call, where “04611715111” is the number you wish to call

Switch / 3 state switch / Timetable

Default codes: 93 / 94 / 95
Descriptions: Code to change a switch / 3 state switch status / timetable status
Usage:

change the status of switch / 3 state switch / timetable:

  • dial 93 and follow the audio instructions
  • otherwise enter the string 93*<switch_id>*1, then send a call

example: enter the string 93*10*1 and then send the call, where “10” is the Switch ID, “1” is the option allowing you to change the switch status

Pickup

Default code: 88
Description: Code to pick up a ringing call of another user or a call group (users must be registered to the same PBX as you)
Usage:

pick up a ringing call of another user of the same ACL group:

  • call 88

pick up a ringing call of another user:

  • enter the string 88<extension>, then send a call

example: enter the string 88100 and send a call, where “100” is the extension number of user who has a ringing call

pick up a ringing call of another ACL group:

  • enter the string 88<ACL_group_ID>, then send a call

example: enter the string 8811 and send a call, where “11” is the ACL group ID

pickup up a ringing call of a call group:

  • enter the string 88*59*<call_group_ID> or 8859<call_group_ID>, then send a call

example: enter the string 88*59*10 or 885910 and send a call, where “59” is “Call group” feature code, “10” is the call group ID; NOTE: “Call group” feature code on new systems is 79

Continuity

Default code: *5
Description: Code to switch a call to another device
Usage: Press *5 during a call on one of the devices registered to your account and continue the call on that device.

Call group

Default code: 59
NOTE: The Feature code after system reset and for new systems is 79
Description: Call a call group
Usage:

call a call group:

  • dial 59 and follow the audio instructions
  • otherwise enter the string 59*<call_group_ID> or 59<call_group_ID>, then send a call

example: enter the string 59*10 or 5910 and then send the call, where “100” is the extension of the user participating in the phone call

pick up a ringing call of a call group:

see “Pickup” feature code.

Call group management

Default code: 97
Description: Call group login/logout management. The feature code allows you to dynamically log in to / log out from a call group; you can also add other users to call groups, in case it is not restricted by the ACL “can / cannot” “manage the callcenter”
Options: 1 to log in / 0 to log out / 2 to auto-switch
Usage:

dynamically log in to / log out from a call group:

  • dial the feature code and follow the audio instructions (works only for login / logout; not for auto-switch)
  • enter the string 970/1/2<call_group_ID> or 97*0/1/2*<call_group_ID>, then send a call;

example: enter the string 97110 and send a call, where “1” is the option allowing you to dynamically join a call group, “10” is the call group ID

dynamically add another user to a call group / exclude another user from a call group:

  • enter the string 97*0/1/2*<call_group_ID>*<extension>, then send a call

example: enter the string 97*1*10*100 and send a call, where “1” is the option for login to call group, “10” is the call group ID, “100” is the extension you wish to add to this call group

Intercom

Default code: 96
Description: make an announcement to a user; phone of this user automatically answers in speakerphone mode
Usage:

transmit a message to a user:

  • dial the 96 and follow the audio instructions
  • otherwise enter the string 96*<extension> or 96<extension>, then send a call

example: enter the string 96*100 or 96100 and then send the call

Speed Dial

Default code: 80
Description: Code to call phonebook short numbers
Usage:

  • dial 80 and follow the audio instructions
  • otherwise enter the string 80*[short_number] or 80[short_number], then send a call

example: enter the string 80*100 or 80100 and then send the call, where “100” is the “short number” of the phonebook contact

Conference

Default code: 98
Description: Code to access a conference
Usage: The code can be used to access conferences created via Dialplan or via Collaboration (Audio conferences or WebRTC Kite videoconferences);

call a conference / transfer a call to a conference:

  • dial 98 and follow the audio instructions
  • otherwise enter the string 98*[conference_id] or 98[conference_id], then send a call

example: enter the string 98*1111 or 981111 and then send the call, where “1111” is the conference ID number

How to enable external users to participate in the audio conference (not WebRTC-based): https://manuals.wildix.com/dialplan-applications (see Dialplan application “Play sound and wait for digits”)

How to create conference rooms via Dialplan? https://manuals.wildix.com/dialplan-applications (see Dialplan application “Conference”)

Echo

Default code: 76
Description: Code to generate a call with the echo on the audio
Usage: Call 76 to make an audio test.

 

    1 Star2 Stars3 Stars4 Stars5 Stars (6 votes, average: 5.00 out of 5)
Loading...